Bathtub corner shelf, Tile racks are great for holding washing soap and basic supplies, and are easy to install. Keep in mind when installing your tile platform that the platform is not a safety grip. It is not screwed into anything and will fall if trying to support his weight with her.
The bathtub corner shelf in the exact spot where you want to go, and trace its shape on the wall with a pencil. Touch the center tile with a chisel and a hammer until the broken tiles, and then carefully remove the pieces. Pry the wall of any other tiles they are in the drawn form. You must remove the tiles that will be only partly on the shelf. You’ll cut to fit around the new platform, so beware of breaking the least possible.
Mix tile grout according to package directions, adding the necessary amount of water and mix with an attachable drill mixing paddle until it has the consistency of thick glaze. Spread the tile mastic to the flat area with a rough edge to it no 1/8 inch thick layer of putty. Press the platform putty, shifting smoothly from side to side to seat the bathtub corner shelf filler. Cut leftover tiles to size using a tile cutter. The easiest way is to follow existing lines drawn parts removed intact. Place tiles back into position around the platform, taking care not to disturb the tape. Allow the caulk dry for 48 hours, after which you can remove the tape.