Bathtub Drain Cover
There is pop-up drain covers pop when opened and drain screw covers held in place with screws. Drain screw covers usually sit on top of the leak rather than inside. You may have to remove the drain cap when a blockage develops and requires you to clean the pipes in the drainage, or when you want to replace the tub itself for a bathroom remodel. Level of difficulty: Moderate Things You Need Open the drain –Bathtub Drain Cover to cover listed above.
Slide the screwdriver under the drain cap. If bathtub drain cover you have holes, hold the screwdriver in the holes. If not, place the pliers down the drain, under the cover. Remove the cover up or move it loose. Use a screwdriver to remove the cover up through the holes. If there are no holes, use a screwdriver as a lever so can move the clamps under the deck. Watch for a gap below the cover and drain. Slide the screwdriver between the drain cap and drain.
Lever drain cover out until it is free. Lift up to remove. Bathtub drain cover Unscrew the screws, usually located in the center of the drain cap. Using a screwdriver, turn each screw clockwise to remove it. Turning right is screwed in tight. Replace the screws in a safe place to avoid losing them. Avoid placing them in a counter sink, where they could fall into the sink and down the drain. Slide the screwdriver in orifice