King bed with storage drawers – King-size beds are large, with a footprint of more than 40 square meters, which is why they are popular. Building a storage bed frame your king mattresses can take that footprint into 60 cubic meters of storage space. This project will take two or three hours once you have collected your timber. Build a king bed with storage drawers, Install a 76-inch shelf and a 78-inch shelf in an “L”, connecting them with two L-brackets on the inside corner. Place each brace three centimeters from the edge of the woods.
To build a king bed with storage drawers, Add the second 76-inch plank to the other side of the 78-inch board, the formation of a “C” Connect it with two L-brackets, set three centimeters from the edge of the timber to the inside corner. Set the remaining 78-inch shelf in the “C”, parallel to and 37 cm from the first 78-inch board. Connect it with two L-brackets to the inside corners, like you did with the other wood.
12 Photos Gallery of: Build a King Bed with Storage Drawers
Leave a plywood plate down over the open side of the frame that you have built up, with its inner edge flush with the middle of the central 78-inch board. Screw it down with a wooden propeller an angle, driven through the plywood and into the edge of the boards. Put the other plywood down on the other side of the frame flush with the plywood that you screwed. Slide one post on the plywood to the open side of the king bed with storage drawers frame, 16 inches from the one 78-inch board, the outer side flush with the edge of the plywood. Secure it with two wood screws drilled through the plywood into the end of the post.