Build a Sliding Barn Door Design
Sliding barn door – sliding barn door it can also partially opened to allow smaller objects slide in the barn. To allow easy opening and prevent deformation of your tracks or styles, you need to build lighter than regular doors barn doors. Build a sliding barn door, cut the boards 2 by 4 inches to the height and width of the ship door to create the frame. For stronger frames, double stack of tables or use 2 by 4 beams 4 by 4 inches. This adds a lot of weight, so consider extra force is really necessary.
Assemble the frame using metal clamps and galvanized nails or screws. Cut a crossbar and install in the center of the frame. Large barn door, you may want to use a diagonal crossbar in each half of the table. Cut your tables up to the barn door and support on the frame. Fasten with galvanized screws or nails the sliding barn door frame. Use some wood glue or adhesive for added strength.
Monte track of your sliding barn door at the top of the frame, using a carpenter’s level accurate. Use wood screws and power driver to ride the track under barn door. The tracks can be located anywhere on the edge of the frame. Measure the distance between the assembled and then install the clues to the walls of the barn tracks. Fold each measurement and remount if necessary.