DIY Twin Bed with Storage Drawers
Twin bed with storage drawers – When many people think about how to modify a storage bed herself she scared of the project due to complex plans with mortise and tendon joints, chain saws, miter cuts and so on. Simplify project by turning prefabricated storage cubbies an attractive, modern-looking twin bed with storage drawers. If you cannot find long storage cubbies, use modular storage cubes for the starting spot.
To build twin bed with storage drawers, Paint the cabinets and a sheet of 3/4 inch plywood or MDF 40- by 80 cm, if desired. Place the two cubbies back to back on the ground, so that the storage cubbies rotate both sides. The ends must be the same. Place the blade of MDF or plywood on top of the cubbies so that the edges of the plywood or MDF match plate around the edges of the Cubby units.
Twin bed with storage drawers, Drill countersunk holes dimensions slightly smaller than 1 5/8 inch wood screws around the perimeter of the plywood or MDF sheet, and a double line approximately 1 cm on both sides of the middle of the plywood or MDF board. Row 1 5/8 inch screws through the pilot holes to secure the blade down. There is a screw would be about every 5 to 6 centimeters. Place the twin bed with storage drawers rather than in the bedroom and place a twin mattress on top.