Front door locksets – locksets provide you with privacy that is needed at the front door of your house. When the unit becomes old or you need to improve the appearance, it is important that you change it. For you to remove the unit you need to do the following:
You should start by pressing the release button on the shaft of the interior door handle. For ideal results you must use a flat tip screwdriver. When you do this front door locksets will come from the shaft. After doing this, you have to use a screwdriver to remove the cover plate. Once off you have to look at the outer edge of the cover plate for the opening which will allow you to insert the tip of a screwdriver. If you look closely and you discover that there is no opening, it is likely that it was in the bottom edge.
12 Photos Gallery of: Front Door Locksets and Handles Black
When you find the opening you must insert a screwdriver and remove the two screws that hold the mounting plate and front door locksets. If the mounting plate has not been tampered with, it will come easily. In addition to removing the mounting plate you also need to remove the front cover. Here you need to remove the screws from the cover on the hook assembly using a screwdriver.