Build a bathroom space savers offers additional space for towels, toilet paper and toiletries. These storage systems do not take up additional space because they use wall space empty above the toilet. Both space savers premade simply furnished and are available.
Education to make bathroom space savers: cut the 8-foot long board into four pieces 24-inch long. Cut a length of 10 meters, 1-by-12-inch piece of wood in half so you have two lengths of 5 feet. These are the legs of the unit. Paint the boards with latex paint or paint in the desired color, apply two coats of paint. Allow it dray.
Measure the height of your bathroom and add 6-inch. Determine the required entry level for the remaining plans. Mark the position of the legs for these shelves, placing fourth shelf at the top of the legs. Put a milling machine on the drill tip.
Drill two holes through the legs and into the edge of the platform for each attachment bracket, using the tip of the milling machine. Attach the brackets to the legs by screwing the wood screws into the holes. Tighten the screws.
Fill in the vacuum created by each screw with wood putty. Allow the putty to dry, and then paint over the trademark putty to disguise the screws. Slide the bathroom space savers in place over the toilet. Anchor the bracket to the wall with an anchoring kit wall. Follow the installation instructions with the kit.