Is a useful piece of furniture? It is convenient to hold the blankets in a living room or toys in a child’s room instead. A padded storage bench not only elements but functions as a seat or storage ottoman bench. Getting two uses of a piece of furniture is important to save space, especially in small houses, where extra space is appreciated. Banks filled storage are not hard to do, and the materials found in hardware stores and craft items.
Cut a wooden storage ottoman bench in the middle of the saw so that you end up with two pieces of 2 by 2 foot. Cut the board straight or does not fit properly on the bench. Then cut ¾ inch in two of the 2 by 4 boards. Sand all the pieces of wood with sandpaper 220 grit sanding sure all rough edges. This grain is thick enough to smooth the wood without creating scratches. A smooth surface will create a professional look when the bank is full.Place the plywood boards to form a box. Start by placing one table 2-for-4 on a flat surface, and then add all the sides and the top to ensure a good fit. Once you have confirmed that all joints fit together, mark the areas where pre-drill holes for the screws. Start at the corners and pre-drill the sides and bottom set 4 inches apart on the sides and 4 inches from the front and rear. Your end result should be 6 holes on the sides of 2 meters and 12 holes on the sides of 4 feet. Install the screws to complete the picture and use wood glue along the edges for stability.
Install the hinges joining the parties to the case and final plywood board to complete the cover. Install a hinge three centimeters away from the edge of the box. Repeat this procedure for the hinge on the opposite side. Paint the box in your chosen style storage ottoman bench. Use bright paints a more durable finish and, if necessary, use primer as a base. Paint the inside and outside, and wait for it to dry before touching.
Cover the body pillow with pillowcase and use a stitch to close the open end of the box. Fold the edges of the pillowcase on the open end into ½ inch, and then draw the needle through the fabric up and over until it is completely sealed. Attach the pillow to the top of the bench to finish. Install the casters at the bottom of the box to make it easier to move in storage ottoman bench. Pre-drill the holes to prevent splitting wood screws and install appropriate size. Buy a set of wheels with locks for the table does not move when you sit on it.