Vessel sinks can be made of glass, stone or copper. These sinks look great bowls that are placed on the counter. Place the mounting ring over the hole in the countertop surface. This is what the ship sinks rest upon. The rubber hand should touch the deck with the white side up. If the ship sinks did not come with a mounting ring, a bead of silicone adhesive around the bottom of the vessel sink where the counter is played spread.
Place the vessel sinks on top of the mounting ring on the hole. If you do not have a mounting ring, ensure that the silicone adhesive spread on the bottom of the vessel sink is between the countertop and sink. Use a paper towel to wipe up any additional adhesive.
Keep the pop-up drain with both hands. Unscrew the bottom of the leak from the top of the leak. Remove the brass nut, hard and soft bottom washer washer drain body, leave the top soft washer in place. Put the drain body into the hole in the center of the vessel sinks. Slide the bottom, soft washer on the drain at the bottom. Push until it is firmly against the bottom of the counter. Place the washer and push firmly against the soft washer.