Installing Pulleys at Sliding Door Dog Door
Sliding Door Dog Door – The ports run they offer a unique way to close a door without losing space floor or the wall, as in the case of traditional doors. A key element of its effectiveness is the placement and installation of sheaves.
Instructions installing sliding door dog door among others; 1) Place the door on trestles power work on top of it. 2) Select the top of the door at approximately 7.5 cm away from the edges on both ends of the surface. 3) Mark the center of the thickness of the door in the marks of the second step. Extend these lines from 7 to 10 cm at the center of it. These lines are used to align the center of the pulley. 4) Place a pulley assembly on the center line with the edge of it on the mark of 7.5 cm made in the second step. Make sure that the center of the edges is flush with the center line and that his open side is placed toward the rail. Select the top of the door through the holes for the screws in the mounting base of the pulleys. Repeat this step on the other side.
Use an awl or nail kit to create holes for the screws in each of the marks made in Step 4 and attach the pulleys with the screws. Make sure the center line aligns them with the pencil mark made on the door. Thereafter, the sliding door dog door is ready to be installed in the frame.