Lighting is important in bathrooms, especially on the vanity, so you can see yourself in the mirror. If your led bathroom vanity light contains only one bulb, you can replace the single fixture with two games, and earn more light. Turn off the light at the main electrical panel in your house. Locate a wall stud near each place where you will install the new accessory, and mark the location. Draw an electrical box circular wall with wooden poles where the led bathroom vanity light is being installed. Cut a hole in the wall with a drywall saw at each location.
Cut a piece of electric wire 2.12 to fit between the two holes. Scope into the hole cut into the drywall on the wall between the light switch and the hole for the original light fixture and grab the power cord to the light fixture. Remove the tape from the end of the cable to the wall, and pull it through the hole for the new device. The tape to the wall under the new hole.
Install the cable for the first installation of led bathroom vanity light. Connect the black wire from the new light switch and lead to accessory to a second end of the short black cable with a plastic connector cover, and then repeat this with the white wires. Fold the wiring into the electrical box and mount the device on the wall. Install the second game by connecting the black and white wires to the appropriate screws on the lamp. Connect the bare copper wire to the grounding screw in the electrical box.