You have decided that a system of water treatment by reverse osmosis is the one that best meets your needs and you want to install it on your own. The advantages of doing this are: you save 75% of what someone do it for you charge. You better know the system and have a good understanding of how it works. You can perform maintenance yourself, saving you the cost of the technicians who perform it. You can install the system in a few hours when you want and not have to wait for the technician in charge appears. Follow these steps to learn how. Purchase reverse osmosis system. You also need a drill with a drill 1/2 “to place- Reverse Osmosis Faucet the faucet and a small
reverse osmosis faucet at least once before starting to become familiar with the procedure and confirm that all items necesarios.Junta have everything you will need for installation and make sure to have it near where you will be working, usually below Kitchen sink. It is not a bad idea to read the instructions before you begin. Remove the system from its packaging and check if there are missing parts. Assemble the filters in the proper order. Most systems come with filters and assembled in a filter bank. The only filter that has not been installed will be the reverse osmosis membrane. This filter is sealed in a package and should not open it until you are ready to install on the system. Remove all items you have under the sink and set them aside in a safe or if children can access their site. This will expose the pipes better and give you room to work.
Reverse osmosis faucet This is a good time to cover the bottom of the sink cabinet with a liner or something similar to prevent moisture gabineteElige miscarry the location for the RO faucet. This may be on either side of the washing. Make sure there is enough space at the bottom of the washing hoyoPerfora before drilling the hole for the faucet reverse osmosis system in the chosen location and installs and adjusts the tap. It is possible that the space is a bit tight and a flashlight is needed. Install plastic pipe for water at the tap and fasten. Make sure the tap is secured before continuing and that once the filters are installed and the tank will not have much space to access the valve shuts off the cold water supply valve and the corresponding valve assembled typecast as directed.